|
Registered
Join Date: Aug 2005
Location: Between Detroit and Toledo
Posts: 117
|
I am not an expert, but as is told here, you need no special tools. A good high lift jack and jack stands, 1-1/16 & 1-7/16 socket, somehow a way to remove the input shaft nut, and torque it back on (read the threads above). So far, the coming apart and cleaning has not been hard, but I still have to go back together. Cheers, Mike.
__________________
1981 911 SC Black / Black & Tan sunroof coupe.
Run like the wind...straining the limits of machine and man... (Peart)
|