|
RE: knockdown texture, like SO CAL says, buy the aerosol can, it has different nozzles for different finishes.
Hole repair - Get a big piece of good scrap drywall and drywall screws and your Cordless makita and some mud.
Cut out the damaged section all the way till you have two studs present - you can use a steak knife if you have to. Put your patch piece in, tape the seams and throw mud across it and when dried, sand it outwards till it's visibly flat.
Throw the texture down fanning outwards and you'll have to go way out to get it to blend.
Dry and paint..
rjp
__________________
In the movies only bad guys sleep in king size beds.
|