|
Make the home depot version that goes on the a-arm, they'll work just fine. I've had mine on my car for 3 years (dedicated race car pretty low) and never had an issue. However my verion is simpler than clam shell type. Envision the plastic pipe below the a-arm bar. A-arm bar is red hot and you just push the pipe up onto the bar and melt a slot into the pipe until the top of the bar is just about above the top of the pipe. ...So essentially what you do is take the plastic pipe and cut a slot into it as would be in my melting example above. Hose clamp it on around dia of pipe (that's why bar is to just protrude over top of pipe), and rtv up the gaps around the bar. That thing is not going anywhere.
For the part of the hose that gets slightly sandwiched between tub, I wrap it with duct and aluminum tape.
|