|
Rebuilding the injectors is no more than replaceing the caps and seals on the outside.
The proceedure i used to clean the injector was to use a 12 volt source and actuate the injector wile carborator fuid was forced down the tube after a few flushings i hooked it to the car and verified that it sprayed with an even mist
noticed a lot better flow and even spray afterwards.
I'll get those plugs tomarrow and install them. I never replace the plugs my father gave me the car about 3 years ago.
I'll check the vaccum lines again but i don't think there is a problem...thanks for all your help fellas
|