|
modelguy,
The CDI unit gets power from 2 places. One is the starter motor. This sounds like it is still working. The starter motor wire begins at the starter with a yellow wire, and goes to the CDI unit - it changes from a yellow wire to a black/red wire, and finally a solid red wire at the CDI unit.
The other place the CDI unit gets power from is during the "run" position of the ignition switch. This sounds like your problem. This wire goes to the CDI unit as a solid red wire.
Turn your ignition on to the run position, and check the red wire going to the CDI unit. It probably doesn't have +12v going to it like it should. Follow this solid red wire until you find where it has either broken or a connector is no longer making connection.
__________________
Rex
1975 911s and 2012 Range Rover Sport HSE
1995 BMW R1100RS, 1948 Harley FL
|