Worn SC throttle lever......
The throttle cross shaft that mounts on the engine in my SC has worn to a sloppy fit. This is the shaft/bracket that the rod from the throttle body connects to. It is part number 67 in the 911 servicing manual. Should this shaft have bushings or does it normally ride in the cast bracket? The wear is enough that I now have about 1/2" of free play at the throttle pedal with all of the adjustments taken up. Any ideas on fitting bushings? Or does the bracket have to be replaced?
__________________
FEC3
1980 911SC coupe "Zeus" 3.3SS
god of thunder and lightning
|