[Tim Walsh]

My instructions are for My work's 2900-3550 access layer switches, but I belive it's the same for the 4000 series as well. Also these are bare intructions on adding vlans to particular ports

config term (should bring you into the configuration mode)
int fasteth 0/1 (or whichever port you're working on)
no shutdown (for activating the port)
switchport access vlan xxx (specifiying the vlan)
(repeat previous three statements for all ports)
end
write


I'm still pretty new to IOS so I can't say they will definitly work but it should give you a start to adding vlans and activing ports. YMMV, no guarentees, etc, etc