Yes, these headers would work with your car. They are 1.5 inch diameter inlets, so the low end torque would be good but you would run out of air at the top if you are building a 3.2 hot rod. If you're staying stock DME, you would be fine. You can add a cat and muffler to them if needed. Smog laws vary by state.
The other thing to consider with headers is that you will loose your Heat Exchangers and the use of your heater.
Let me know.
Thanks,
Bill Pickering
e-mail:
nine14cats@yahoo.com
(408) 410-9005