My Mega Squirt Stimulator came in the mail yesturday (green circuit board on the right side). I soldered it together this morning which only took an hour. Boy is the new soldering iron much nicer to use. I then grabbed an old AC/DC 9V adapter I have had for 20 years (I knew there was going to be a reason to keep this thing around) BTW this just reinforced my packrat habit. Plugged in the Stim into the Mega Squirt computer, plugged in the AC/DC adapter and check voltage on the power supply. It is suppose to read 5V and my meter was showing 4.98V on all the pins I needed to check. YAH! So My power supply is functioning which is a relief because I was worried about the HUGE soldering iron I was using at the time.
Now it is time to solder up the serial communications.
Speedy
__________________
1983 944 guards red with 16" Fuchs, Host of Wisconsin area timing/ balance shaft belt tensioning party
1987 944S Purchased from Legion. Corvette LT-1 V-8 conversion with Mega Squirt II
Check on progress --->
www.porschehybrids.com/gallery/speedracing944
Favorite Road =
www.tailofthedragon.com 318 turns in 11 miles (11 min 20 sec best run)