|
Registered
Join Date: Jun 2006
Location: Adelaide Australia
Posts: 886
|
Guys,
I've checked the floats yesterday and all are within specs. The engine is advancing fine up to about 35 degrees at 6000rpm.
It's an S spec 2.4. Without the vacuum retard I think they are supposed to be set at around 5 degrees BTDC instead of 5ATDC but I have varied the timing to see if it has any effect which it doesn't......
After revving the engine is just sitting at anywhere from 1500 to 2000rpm and generally not dropping back. I used all new manifold gaskets top & bottom and have tightened everything down as much as I dare.
Any more guesses?
__________________
'74 RS 3.0 Replica
Porsche 968 Clubsport SOLD
'70 911E Bahia Red SOLD
'71 911 S/T Replica 2.3 Twin plug BEAST  SOLD
|