|
Registered
Join Date: Feb 2006
Location: Sherman Oaks, CA
Posts: 215
|
[QUOTE]Originally posted by kang
[B]If you mean the console switches, yes, you can replace the trim. The whole switch assembly just pulls out. You can then remove the bulbs from the back, and gently push out the old face plate. Pop in the new face plate and you're good to go.
Here's an example of the replacement face plates. They're called "trim" here. Verify the part numbers before you buy, as this is from an old version of PET.
Thank you Kang, that is what I was referring to. didn't want to pick up the entire switch if it wasn't necessary just the front trim indicating the function.
Does that also apply to the stem switches? Can the facades be removed and new ones replaced?
__________________
1964 Blue 356SC Coupe (Disintegrated from rust)
1970 Orange 911T Targa
1977 Black 930 Turbo 3.0 -1988 Carrera slant nose (Sold)
1996 Black 993 Cab.(Sold, and back in Germany)
2006 Slate Grey Carrera S coupe
|