[alphie]

I've done a lot more testing and research.

The right side case was machined at the spigots, the left was not.

It looks like I can run 1mm on the right and 75mm on the left, this leaves me with a 1.1mm deck height which I gather is good.

I didn't know ebs had the 1mm gaskets, I was going to use 2 50mm on the right side and a .5 + .25 on the left.

I don't imagine its worth getting the 1mm over the 2 .5 at this stage as it would mean another 1 week delay and i'm already forced to use 2 gaskets on the left.

Thanks for the input!

-Rob