[47silver]

Thanks for the replies.

My concern is that the pan does not fall off while on the move, hence i wondered if i should use loctite,
and then i figured that my luck under the car i would over-torque and snap the bolt, so i thought it would be good to know the torque for the bolts.
And then I was also thinking of using the anti-sieze lubricant instead of loctite, to make sure that the bolts can be removed 2 years down the road.

that is my quandry, loctite or anti-sieze, and torque.

If any one knows the standard torque ratings for these bolts i would appreciate getting that information. I searched the web and did not get anything of value except some attractive sources for metric bolts/nuts.


thanks