|
Registered
Join Date: Jan 2006
Location: Westchester, NY
Posts: 97
|
HELP!! It won't start.
The engine on my 89 944S2 died on the track while I was doing 100 mph.
I have traced the problem to no spark. After replacing the DME relay, I found that the spark coil is getting 12 volts but nothing is coming out (verified by a spark tester on the output of the coil to the distributor.).
Question: If one of the sensors or DME is bad, should I not still get voltage to the distributor if the coil is getting voltage? I have not checked for gas flow, but I do know that I have no spark and voltage to the distributor.
David
PS. At this time, I believe that my problem is a faulty spark coil.
Last edited by dmilzoff; 10-16-2006 at 02:25 PM..
|