http://forums.pelicanparts.com/showthread.php?threadid=311071
Here is the thread I started. There is a mod which involves trimming the black tab in the picture. I used a hack saw and then smoothed the edges with a file. The wheel came off real easy once the nut was undone. I think you torque the nut back to 44 ft/lb (check on clarks-garage.com)
Speedy
__________________
1983 944 guards red with 16" Fuchs, Host of Wisconsin area timing/ balance shaft belt tensioning party
1987 944S Purchased from Legion. Corvette LT-1 V-8 conversion with Mega Squirt II
Check on progress --->
www.porschehybrids.com/gallery/speedracing944
Favorite Road =
www.tailofthedragon.com 318 turns in 11 miles (11 min 20 sec best run)