[shikzachaser]

I just used the same way to find the lights the pioneers did...Ebay. I think they were around $100 w/ the new 55 / 100 bulbs. Let me know when you get them and I'll premake the relays for you for my cost. It only takes a few minutes. The installation essentially is just cutting the yellow and white normal supply wires to the low and high beams and using the old supply side to trigger a 30 Amp Bosch relay that connects the new 10ga power wire to the old load side. That and running a new ground and you are gold. I like the idea of taking the time to run two seperate power wires, 1 for high, 1 for low in case something goes wrong with one and it blows a fuse, at least you will still have lights.

Steve