|
Registered
Join Date: Jan 2005
Location: Gilroy, California
Posts: 4,163
|
I'm using the viton green o-rings in my 3.2L rebuild as well, in addition I believe Wayne's book recommends putting some Black high temperature silicone (Loctite) around the o-rings as well. Don't forget that the surface must be very clean to properly seal and if your case thru bolts use the beveled washers you can reuse them after a good cleaning. Good luck, I'm nearly completed with my complete engine rebuild.
Regards,
Alex
__________________
Its easier asking dumb questions than fixing dumb mistakes
1974 Porsche 911 Coupe, RSR Project
1976 Porsche 911 Targa, Black
1986 Porsche 911 Carrera, Black
2006 Porsche Cayenne S, Black
|