|
Bollweevil
Join Date: Dec 2003
Location: Fulshear, Texanistan
Posts: 3,363
|
I have constructed several wrought iron gates but nothing on the order of 200'. As Joe indicated, it will be a LOT more work than you can imagine, the slope just adds insult to injury.
You will need a good MIG welder (with gas), a good quality helment(preferably auto-darken), gloves, a good grinder, etc etc.
You can probably get the above for $600+/- if you look around. Also you will need a lot of tubular steel, primer, paint, etc.
If you decide to do this, strongly suggest you take at least a basic welding course.
__________________
Jack
74 911 Coupe
2.7L - K21 Option - S suspension
|