Quote:
Originally posted by TroyGT
Okay... here's one that is very close and is of PH type:
Brand: Accel
Product Line: Accel Fuel Injectors
Injector Advertised Flow Rate (lbs/hr): 24 lbs./hr.
Injector Advertised Flow Rate (cc/min): 255.0cc/min
Quantity: Sold individually.
Injector Impedance: 2.1 ohms
Driver Type: 4\1A peak and hold
Overall Height (in): 2.880 in.
Seat to Seat Height (in): 2.270 in.
Manifold O-Ring Outside Diameter (in): 0.383 in.
Fuel Rail O-Ring Outside Diameter (in): 0.406 in.
Outside Diameter (in): 0.975 in.
Injector Plug Style: Bosch/Amp Style
Would this be an acceptable replacement?
-Troy
|
Do you remember where they were listed and what the price was. Also unfortunately the other bosch site does not list the 0280-150-158 and the accel site only list the high impedance. The specs are close the bosch seat to seat is 60.3mm or 2.37 in and the total height is 77mm or 3.034 in. I don't know if difference in height would effect anything or not.