Quote:
Originally posted by trekkor
Also, any possibilty you are sinking the nails too deep? do you have the regulator on the compressor at around 115 PSI?.
I prefer to "chase" the high nails after each sheet is in, rather than setting a ridiculous number of hand nails.
Over-nail the corners. Sink a hand nail in the intersections.
KT
|
Nahh, the regulator was set to 90 psi. After reading your earlier posts on nailing, I figured I would rather follow behind with a hammer and sink whatever ones didn't seat, rather than double or triple nailing the "over-sunk" nails.
Great idea, btw, hand nailing the intersections. I'll do that too.
Randy