|
Ride Height
I own a restored 1973 911S with 22mm front and 26mm rear torsion bars along with new bushings and Koni's. I know that these cars should have approximately 25 1/2 in. front and 25 in. rear fender measurements. My question is, Should this measurement be taken with a full tank of gas or closer to 1/2 tank? The reason that I ask is the front of the car will raise up at least 1/4 or more when the tank is 1/2 empty and also, as the front raises up the rear drops a little. This is more evident at high speeds and acceleration as the front lifts up and feels a little light and unstable.
|