Quote:
Originally posted by john_cramer
I would not leave the gaskets out unless you have the cylinders machined to reduce their height by 0.25mm, otherwise you will end up with too much deck height. I plan to use them in my 2,0 and use Curil-T.
|
Hi John
I think you got your statement reversed.
By removing the base gasket you reduce the deck height.
The taller the cylinder the greater the deck height.
Deck height equals cylinder height plus base gasket minus piston height.
BG+CH-PH=DH
This assume that piston height is meassured from case spigot.