[OldTee]

At $95 for 90ML at Ellsworth Adhesives (other places may be less expensive) is this really worth it for a single (at least at the moment) 911 OH? The spec is quite good.
I can understand why this, or any, product would not be used during original manufactur, but the changes and wear occasioned by 100K miles can use some help. In fact, the damage from leaking oil under the cylinder bases is not such a good thing, I think.

Spec:
RTV-730 Features
Potting
Mold Making
Rollers
Pink
Initial mixed viscosity: 15,000 cps
Specific gravity: 1.1
Hardness shore A: 30
Tensile, Die B: 750 psi
Elongation: 400 %
Tear, Die B: 115 ppi
Linear shrinkage: 0.1 %
Thermal conductivity, (BTU·in)/ft (2) ·°F): 1.1
Coefficient of thermal expansion, cm.cm °C: 29x10 (-5)
Typical Temperature Resistance, °C: -54 to 204
Dielectric Strength, V/mil: 460
Dielectric Constant @ 1000Hz: 3.0
Dissipation Factor @ 1000Hz: 0.004
Volume Resistivity, ohm·cm: 7x10 (14)