One other issue, to check out, is the flange lead-in. (the 3.2 has bigger exhaust ports) Check out
this thread (click)
....and specifically:
Quote:
Originally posted by Brad Roberts
OK.
They fit fine. Bolt them up using STOCK 3.2 gaskets. Below is a pic of a 3.2 set. I point out the difference between the two. Both are thick flange.. but one of them gets a "beveled" edge on the outside and the other gets a "beveled edge on the inside.
3.2 Liter 1 3/8 ID and 1.5 OD.
Here is the difference between the two. Very minor differences and most if is to fit the heads correctly.
B
|