|
Registered
Join Date: Jun 2004
Location: Rio Rancho, New Mexico
Posts: 1,325
|
Hi Bob,
The 2.2L motor uses a different cam. The intake opens to 1mm at 29 degrees before top dead center, BTDC.
The 2.4L motor intake opens to 1mm at 18 degrees BTDC.
I haven't found the set up spec's in my references for your motor.
Since the 2.2L valves open 9 degrees sooner than the 2.4 the set up will be more than 2.9mm.
Perhaps someone has the setup info. If I run across it I'll repost.
__________________
DOUG
'76 911S 2.7, webers, solex cams, JE pistons, '74 exhaust, 23 & 28 torsion bars, 930 calipers & rotors, Hoosiers on 8's & 9's.
'85 911 Carrera, stock, just painted, Orient Red
Last edited by 2.7RACER; 05-11-2007 at 08:30 PM..
|