|
Try not, Do or Do not
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
Posts: 14,228
|
1211 on the flywheel seal will not hurt but in turn will not help.
The crank and flywheel seal should be installed dry .
There is no need to glue them. Non hardening glues ( Curil T, Curil K2, Gaska Synch and Aviation Permatex) used for this application can promote squeeze out.
A touch of 1211 at the case seam behind the seal is a technique that has surfaced of late but I have not added this to my method of sealing.
|