|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 15,172
|
On my 914 I ground the welds flush and then metal prepped with Ospho. After that was dry I used automotive seam sealer purchased from NAPA and I spread the seam sealer over the welded seam. The stuff I used came in a caulk tube so I layed a heavy bead and then took rubber gloved fingers and spread/pushed/smeared it into a flat covering. I let that dry for a week and then brushed on a oil based general purpose primer. I will top it off with a thin coat of auto undercoating and then will top coat with single stage auto paint to match the rest of the car. That should do the trick.
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
|