[toddu]

Good feedback Rusnak. I'll drive the car tomorrow to see if the noise changes while applying the brakes. That should narrow it down to something wth the brakes or not. I put new lines in while I gad it all apart, so should be no issues in that department.

No noises before it was all apart, so if it is something with the bearings, I must have done something wrong with putting the hub on the assembly. If I rule the brakes out, I'll take the hub back off (have to to put longer studs in anyway. I'll check how things are seating at that point. Do I just leave the front bearing out to see how the hub, rear bearing and hub have all seated?