|
Yep intake must be pulled and you will not regret doing it. Replace the oil seperator seals while you are in there!!! I just had to replace all lines under it and can be purchased here at Pelican. The reason to pull the plenum...there is one small hose that is attached to the underside of the plenum and impossible to remove or see the cracks it most likely has if an OE hose. So the moral is to pull it to see all and any issues.
Also make certain the hoses go on the the correct flow(arrows) on the ISV, or you will be doing this job 2x's.
Dal
__________________
PCA " I've been everywhere, done everything......just can't remember any of it!" 
Last edited by 924Sman; 07-29-2007 at 04:47 AM..
|