|
Registered
Join Date: Jul 2001
Location: mt. vernon Wa. USA
Posts: 8,763
|
RW,
I don't believe that there is a torque spec for the headstuds. They should install without much resistance and are installed to a height spec of 135mm length above the case. I.E. installation height from the case to the top of the stud should measure 135mm. Loctite 271 is used as a threadlocker. (refer to pages 136 & 137 of waynes rebuild book.
regards,
al
__________________
[B]Current projects: 69-911.5, Previous:73 911X (off to SanFrancisco/racing in Germany).77 911S (NY), 71E (France/Corsica), 66-912 ( France), 1970 914X (Wisconsin) 76 911S roller..off to Florida/Germany
RGruppe #669
http://www.x-faktory.com/
|