Thread: throttle linkage slack problems
View Single Post
Nick912 Nick912 is offline
Registered
 
Join Date: Dec 2006
Location: Boston, MA
Posts: 87
Ended up only needing about 3/8ths of slack taken out, so I unscrewed the ball cup at the end, nipped about 3/8ths off, threaded about another 1/4inch of the rod, and replaced the ball cup. So far so good.

Thanks for all the input!


Nick
Old 08-03-2007, 07:36 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)