[jhubs]

My driver side elect window will not roll up on my 87. When I move the switch up there is no sound, but when I move the switch down I can hear the motor trying to pull the window down some more. The window is stuck in the down position.

I have pulled the switches out and checked the wires to make sure all are attached...no problems there and there have been no fuse problems or slow window operation in the past...it just would not roll up today.

I have searched this Forum and found that one or more of the switches may be the problem and that a bad switch may affect the other window.

The passenger side window switch on the driver's side door operates the passenger side window properly and the window switch on the on the passengers side door correctly operates the passenger side window.

Should I just get a new switch and install it, or is there a way to test one or all of the switches to see if it really is a switch problem?