|
How is it possible you are turning the crankshaft but the crank pulley is not turning? When the crank turns, the crank pulley will turn along with the balance shaft gears at the crankshaft.
You should be able to buy a good used head for $100 with no bent valves. The machine shop will charge you about $150 to $175 to resurface, replace valve seals, do a valve job, pressure test it etc so your total cost should be around $250 to $275. If you can't find one, I have a rebuilt one fresh from the machine shop for $275.
__________________
There is no mechanical task so great that brute force and ignorance cannot overcome
|