[Porsche84]

That is a nice looking engine. I've done four 3.6 conversions, three in 911s and one in a 914. Here is a picture of my car (red car) with a 92 964 engine and the Varioram I installed in a 74 RS (real one). I've got quite a few notes so when you do the project, e-mail me with questions. I don't read these posts on a regular basis. The only real problem I had with the Varioram was that the engine wouldn't start. I sent the ECU (55 pin Euro) and igniter out to a person who claims to be the "expert" on 3.6 conversion. The ECU came back as "defective" and my igniter was missing. After getting a new ECU and many hours of testing, I gave up. The owner took to car to an electronic wizard and after many more hours, they discovered that the crank sensor had been messed up and the two wires had been swapped. It was extremely frustrating. I hope you can trust the person who modified your ECU to make sure the lock block is totally disabled! Good luck with the project