[clevy70911T]

I bought a pair of used Webers on ebay descibed in the link below as a "good pair". Four of the idle mixture screws are broken off inside and the other 2 are missing, 2 of the air adjusting screws are broken off inside. I know I can buy these parts from PMO and have hopefully have the screws drilled out and re-tapped, but my question is .....

The portion of the main carb body where the air adjusting screw is supposed to screw into has been knocked off and is missing. So much is missing that I can see the valve seat and the hole that re-enters below the throttle plate. Does anybody know if this can be fixed correctly by machining? It is distal to the linkage, so as a last reasort I could I plug it up and use it as my "base" and adjust the other venturies flow rates to it? Hopefully the throttle shafts are tight and not leaking and plugging it won't be a problem.





Ebay link removed at the seller request until this can be resolved. He has received many negative emails from Pelican Heads and this wasn't my intentions. I appreciate the motive as people were "sticking up"for me, but I understand the sellers point of view also.