|
Man it's flat out here!
Join Date: May 2006
Location: Central Illinois
Posts: 2,572
|
Be sure to do the Throttle Full-Twist action before you start the engine with the new battery because the Motoronic looses some battery backed info when you disconnect the old Battery.
From the R1100S Repair Manual:
Connect the positive battery terminal first, then the negative terminal.
• Apply acid-proof grease to the battery terminal posts.
• Install the battery.
• Secure the fuel tank in position.
• Install right and left side trim panels.
• Install dualseat.
• Switch on the ignition.
• Without starting the engine, fully open the throttle once or twice so that the Motronic control unit can register the throttle-valve positions.
Note:
Disconnecting the battery deletes all entries (e.g. faults, settings) stored in the Motronic control unit’s memory. Loss of settings can temporarily impair the operating characteristics when the engine is restarted.
__________________
"What I've tried to do in the two books I've done, Signature in the Cell and Darwin's Doubt, is to show just how weak the materialist's hand is in explaining the key events in the history of life. ... We would encourage people to roll up their sleeves, do their homework on this." Stephen Meyer PHD
|