|
It will cost you about 10 bucks to do it right, if you do it yourself. Go down and buy a bag of pre mix mortar at Home Depot or Lowes. Chip that old mortar out of there, and clean it up. Get an empty 5 gallon bucket it doesn't even have to be that big. Put some motar in the bottom and add water as you stir. Some people will tell you to put the mortar in sloppy/wet, some people will tell you to do it somewhat dry. Both work. If you don't want to buy and specific tools you can force it in there with a screwdriver small spoon whatever. You need to use a sponge to get the dust off of the joint before doing that step though. Then you work it in and can use you finger to meet the contour they used on the other joints. Let it dry for a couple of hours then using a chunk of wet carpet to go over the area you may have gotten motar on the blocks. Very very simple job.
Brick work is my hobby. I have all the tools but you don't need them for that job.
__________________
63 356 So Called Outlaw
76 930
|