View Single Post
Glenn at Pelican Parts Glenn at Pelican Parts is offline
Registered
 
Join Date: Apr 2005
Location: Riverside, CA
Posts: 1,863
G&R All 914 Swap Meet & BBQ on 10/21

The Premire 914 Event of The Year ..... The G & R All 914 Rusty Parts Swap Meet and BBQ. It has been decided that the date shall be:

SUNDAY, October 21, 2007

As always, gates will open at 6:30 AM. Protein burning to begin somewhere around 10 AM. We ask for a $5.00 donation to help pay for the food/drinks and caffeine. Swap Spaces and admission are free.

Directions as needed:

The property is located basically at the intersection of the 60 Frwy and the 215/91 Frwys in Riverside. Due to the construction of a new mixmaster to handle the traffic to Moreno Valley....you have to kinda work the off ramps..

If you are coming from Westlake Village and all points North and East somewhat)....find your way to the 60 Frwy eastbound.....For those of you that will use the 210 or 10...go south on the 15 to the 60. As you approach Riverside and before the 91/215 intersection, get off at Main Street and turn right. Go to the first signal (Spruce) and turn left. Go 3 stop signs, cross the RR tracks and you will see a small sign "Kansas Ave". Due to the construction, Kansas is closed at the RR and you need to go around a building to get to it. Make a right at the sign...make a right at the next stop sign....make a left at the next stop sign.....immediately to your right is the front gate of The Recycler Core Company...it will be closed...continue until you see an opening in the fence...that's the back gate....and that's where you want to be.....Remember. if your car is low, cross the gate track on the far left.

From Vegas.....down the 215...past the 10.....to the 60 Westbound....get off on Main street (1st exit real close). At top of ramp (stop sign) turn left....go to second stop sign (Spruce) and turn left....the rest of the directions are above.

From San Diego....come up the 15 and take the 215 North split around Temecula...215 all the way to where it joins the 60 in Moreno Valley....down the hill in the 60/215 past UCR....to the Blaine/3rd Street Off ramp...GET OFF....turn left at the signal and go to about the 3rd light (Kansas)....turn right...., cross a set of RR tracks and look immediately to left for open gate....

From the OC and Corona, come up the 91....get off (the freeway) at Spruce Street (last exit prior to the 60 Frwy)...turn right....continue thru 1st signal ....across RR and look immediately right for a sign that says "Kansas Ave" .... Kansas is blocked off at Spruce and you have to go around Howard Industries to get to Kansas .... Make a right at the sign...make a right at the next stop sign....make a left at the next stop sign.....immediately to your right is the front gate of The Recycler Core Company...it will be closed...continue until you see an opening in the fence...that's the back gate....and that's where you want to be.....Remember. if your car is low, cross the gate track on the far left.

Happy travels..........

Cell Phone for Slits & Ron .... (951) 751-3584
Cell Phone for Glenn .... (951) 203-1418

__________________
Glenn Sager
Pelican Parts Sales Team
310 626-8765 x240
glenn@pelicanparts.com
'78 911SC Targa, '73 914 2.0, '16 991S, '15 Cayenne T, '24 Macan
Old 10-04-2007, 03:59 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)