|
Registered
Join Date: Jul 2005
Location: Glasgow, Scotland
Posts: 36
|
Oil line connector question.
I am swapping my 1969 2.0T engine for a 1972 2.4T. I have noticed that the connectors for the long oil line (which runs from the oil tank side to the LH side of the engine) on the 2.4T is bigger than on my 2.0T and therefore will not screw onto the oil tank. I have measured the nuts and they are 36mm A/F and 30mm A/F. Can I get a adapter to reduce the size or do I have to replace the oil line (which means removing the heat exchangers)?
__________________
Brendan
1969 911T
|