[turbo6bar]

Can't go wrong with any main brand. Stihl would be the one I'd buy if I had to stick with one brand. Husky good. Jonsered good.

A few years ago I bought a modified Efco 962. It has all kinds of hot rod mods. It cuts like hell unleashed. You can pick them up under the Efco/John Deere name on eBay for cheap.

If you're on a budget, spy for these models: Stihl 026, Husqvarna 350, Husqvarna 346. These are 13 lbs saws that can do virtually anything. The balance is good with a 16" bar. The 026 and 346 are professional models. The 350 is a light commercial unit, but may actually be better suited for a person who only cuts occasionally. The 026 has been superseded with the MS260 ($$$). I would not have qualms buying these saws used, but do buy the one in the best condition.