901 shifter reinstall = mission impossible.
I just replaced the coupler, rod bushing and shift socket on my 70T and all went very smoothly. The problem is reattachment of the shifter assembly.
101 projects says to attach the guide bracket to the housing first but that doesn't work as it leaves me no room to tighten the shift rod joint. If I do it with the guide bracket loose on the shift rod I have no way of lifting it up straight to meet the shift housing for reattachment.
I've been at this for 2 hours. I've tried wires hanger, rubber bands, nothing works.
HELP.
Ulrich
|