Quote:
Originally Posted by ulrichd
Just addtl. info:
- Pin 87: Black/yellow wires from horns
- Pin 85: Brown/white wire from steering wheel
- Pin 30: Red wire to fuse #2
- Pin 87a: empty
- Pins 30/86: jumped
Since I can't open the pin connector I can't match the numbers up with the wires.
Ulrich
|
Ulrich,
You have the correct information from the data you posted above. The
key to your wiring woes is setting the relay socket to conform with the horn relay wiring by connecting (jumpered) #30 & #86.
Three (3) simple steps to perform in sequence:
Connect #30 (plus #86) to the RED wire coming from FUSE.
Connect #87 to black/yellow wire going to the horns
Connect #85 to brown/white wire going to the steering column. The horns should not make any sound at this point. If they
DO, there is problem with brown/white wire or the horn button switch is already
CLOSED.
Tony