Quote:
Originally Posted by rnln
With this lincoln 100, you have the option to weld with gas too, but need a kit. I bought the kit, tank, gas already but not sure how to install yet so can't give you comment on welding with gas.
|
Nothing to it. The solenoid should be ready to go. Screw the hose on the fitting and go. You may have to energize the solenoid, but there are wiring instructions, right? When you pull the trigger, the gas will flow. The pressure is preset on these kits. You'll never weld wire feed only again unless you have something that is just too much for MIG. You can get a bit better penetration with wire feed on larger stock. Don't forget to reverse the polarity on the leads for MIG.