[2Tight]

Originally Posted by The Glademister

Thanks for your response but that doesn't really take care of the mis-matched drivers door and ignition locks. The ultimate solution is a lock cylinder that matches the ignition lock.

I'm not familiar with the 924S but if it has the insert style door handles the original key code is stamped on the passenger door side handle. I used to have a photo somewhere. When you pull the finger lever the key code number is exposed on top of the inside part that gets exposed. It should have a code like 'VB4675' You might have to remove the door frame screw at the rear of the handle to tip it out far enough to see it. This assumes that the passenger door handle is original and the ignition tumbler hasn't been changed either.