|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
The shifter mechanism has to come apart to remove what you call the "shift rod"; see:
http://www.pelicanparts.com/techarticles/911_short_shift_tindel/911_short_shift_kit_install.htm
The "shift rod" is held by the shifter pivot pin and the bottom ball end is pressed into the pivot ball cup. A crush sleeve holds on the knob; the knob may be knocked off the "shift rod" with the technique described in the above tech article.
 Jim
|