|
John
Your proposed method should work. You will be relying on the JE data for dome height.
I'd also do the solder method. I'd do it both ways for all your P's and C's to see how much variation you get cylinder-to-cylinder and between the two methods.
We call it gage R&R in my neighborhood. The measurement variation should be less than 25% of the target spec.
Deck Ht is such a critical measurement, it's probably wort the extra effort.
Good luck.
__________________
Tom Butler
1973 RSR Clone
1970 911E - Sold but Never Forgotten
914-6 GT Clone
|