|
Andy and others,
Since I have put the cam carriers on already can I simply unbolt the heads from the head studs, measure, and re-assemble in the same order if all is well? I assume, if I must swap cylinders around to get good clearance on all 6, I should strip the cam carriers off, clean them, and start over.
Best regards,
Michael
__________________
 Michael
'82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah
'13 Cayenne GTS
|