|
To obtain the "black" factory look, the frames need to be chemically stripped, polished, brushed out matte, then anodized black to obtain the satin black look.
If you are looking for the "brite" or chrome looking trim, the process is different. The parts must be stripped (chemically) fully polished (show quality) then anodized with a "brite dip". Typical clear ano will NOT give you the desired look. There is a special anodizing process called "brite dip". Very few anodizers provide this process.
I can get the parts refinished with the "brite dip" complete for approx. $675. Black anodized parts run approx. $500. If the frames were powdercoated, add $100 to the cost. A black powdercoat finish is an option at about $300.
In each instance the turn around time is approx. 10 business days.
Good luck..
Will
|