|
Registered
Join Date: Jul 2006
Location: Portland Oregon
Posts: 224
|
MSD installed..where does the tach wire go?
This is a '76 car with a '79 3.0
Until today I've had the old points dizzy with a mag dizzy gear on it to make it work but it was turning the wrong way.
Swapped out the points dizzy and 3pin CDI for a mag trigger dizzy & 6AL MSD.
All done and running good.
Just need to know where to connect the MSD tach output to.
Any takers?
__________________
'76 911S w/ '79 3.0 SC engine. Irish Green
|