Quote:
Originally Posted by mthomas58
Some more pics from todays adventures.
Griffiths Kuehl kit comes with a evap baffle to direct all air flow through the coil.
To wrap the box I used one layer of 1/8" closed cell dynamat foam followed by a layer of 1/8" foam with foil from home depot and a roll of aluminium foil duct tape. This added a full 1/4" and made for a snug fit going back in the smugglers box.....any larger and it would not have gone back in.
Here is the condenser unit mounted in front of the rear tire. I had to move the upper mounting bar that bolts to the Seat belt retractor mounting point to raise the entire unit up so it did not rest on the torsion bar cover. Oh, and here's the best part. After removing the seat belt retracter, we could not get it to extend...tried to unlock the mechanism with no luck....in a last ditch effort we ( we = Paul "carnutzzz") popped the cover off and the spring came flying out....fortunately no one got hurt!
 |
Is there a crack in the fender, above the condensor, in the last photo?